TE Connectivity High Power Inverted Thru Board SMT Connectors eliminate wire dress management issues with discrete wire leads around the top surface of LED printed circuit boards. The inverted thru board SMT connectors are designed to be surface mounted through a cutout inside the printed circuit board or through a notch on the edge of the printed circuit board. This design allows the inverted thru board SMT connectors to deliver power to LED aluminum clad boards from the underside of the printed circuit board. Available in 2, 3, and 4 positions, these RoHS compliant connectors offer a low profile top surface height of 2.00mm above the LED PBC, rounded corners to prevent shadowing, surface mount board locks for stability during mating and unmating, and a 70V DC/70V AC voltage rating.

TE Connectivity High Power Inverted Thru Board SMT Connectors accept Economy Power II (EP II) mating connectors. The mating (TE) Economy Power II (EP) plug connectors are based on a .156” (3.96mm) pitch, rated for 600VAC at up to 7 AMPs, and accept 22-18 AWG (0.34mm² to 0.75mm²) stranded wire sizes which are ideal for delivering power to printed circuit boards.

Developed specifically to meet the need for high power connections to aluminum-clad printed circuit boards in LED lighting applications, TE's Connectivity High Power Inverted Thru Board SMT Connectors are ideally suited for LED lighting controls, indoor and outdoor lighting fixtures, and general LED illumination fixtures.

Features

• Eliminates wire dress management issues with discrete wire leads around the top surface of LED printed circuit boards

• Available in 2, 3 and 4 Positions
  
• Accepts Economy Power II (EP II) mating connectors
  
• EP II connectors provide positive latching
  
• Low profile top surface height of 2.00mm above the LED printed circuit board
  
• Rounded corners to prevent shadowing
  
• Connector is positioned in cutout or notch in the printed circuit board
  
• Surface mount board locks provides stability during mating and unmating
  
• High temperature material for reflow soldering process
  
• Tape and reel packaging for high speed SMT processing
  
• Flat top surface allows for vacuum pick up
  
• EP II cable assemblies available upon request
  
• RoHS compliant

Mechanical Specifications

• Operating Temperature: -30°C to +105°C
  
  
• Meets 2.0mm creep and clearance design
  
  
• EPII Connectors accepts 18 – 22 AWG (0.34mm² - 0.75mm²) stranded wire
  

Electrical Specifications

• Operating Current: 7 AMPs
  
  
• Operating Voltage: 600 VAC
  
  
• Dielectric Withstanding Voltage: 2200 VAC
  

Physical Specifications

• Housing: UL 94 V0 rated high temperature resistant thermoplastic
  
  
• Contacts: Tin over nickel plated copper alloy
  

Applications

• Indoor and outdoor solid state lighting fixtures
  
  
• Solid state lighting modules and controls
  
  
• Industrial / commercial meters and controls